Tiny M7 Lens for up to 1/2.9" sensors such as GC2093

The CIL716 is a 2.2mm wide-angle M7 lens for 1/3" to 1/2.9" sensors such as the GC2093. At 0.9g and 10.5mm x 10.5mm, it is one of the smallest lenses Commonlands carries. If your project has a hard size limit and still needs 160° field of view in an M7x0.35 thread, this is the obvious place to start.

The F/3.8 fixed aperture is slower than a typical M12 wide-angle, so you should not expect strong low-light performance. The +8% F-Theta distortion gives a mild pincushion effect, and that can actually help in surveillance or doorbell views where edge content filling the frame is more useful than strict geometry. The 6.3mm image circle covers 1/2.9" sensors at 1MP resolution. Calculate your field of view to check coverage on your sensor.

The construction uses hybrid glass/plastic elements in an AL6061 aluminum barrel. The lens has no ingress protection rating, so it belongs in indoor products or inside a sealed enclosure. It is available only with a 650nm IR cut filter as CIL716-F3.8-M07A650.

Mechanical compatibility is limited by the M7 thread. The Commonlands CLA718 M7 holder with 18mm spacing mounts it directly, and iDS uEye LE Rev1.1 works as well. Rev1.2 requires the part number ending in C-NO. Allied Vision, FLIR, and Basler cameras use M12 threads, so they are not compatible, and The Imaging Source users should check directly for M7 options.

Orders placed before 12 PM PST ship same day from San Diego. At $19 per unit, the CIL716 is priced for volume IoT and consumer electronics deployments. Contact Commonlands for production quantity pricing.