Low Distortion 1.8mm Wide-Angle M12 Lens for 8MP Sensors

왜곡률 최소화 1.8mm M12 렌즈

CIL018은 1.8mm 광각 M12 렌즈로, 1/2.5" 센서에서 125°의 수평 화각을 제공합니다. 이 렌즈는 8MP+ 등급이며 시판되는 130°+ M12 렌즈 중에서 왜곡이 가장 적은 렌즈 중 하나입니다.
$39.00

700pcs CIL018-F2.8-M12B650 (F/2.8 / M12B / With 650nm IRC Filter) in stock in the US

97pcs CIL018-F2.8-M12BNIR (F/2.8 / M12B / Without Filter) in stock in the US

In stock — orders before 12 PM PST ship same day

렌즈 기능

초광각 시야(FoV)

One of the widest angle low distortion M12 lenses on the market.

4K+ 해상도

MTF suitable for 4K+ 1/2.5\" sensors resulting from multiple aspheres.

왜곡률 최소화

Low distortion makes objects appear normal — straight lines stay straight.

광학 및 기계 사양 테이블

렌즈 파라미터 성능 상세 정보
부품 번호CIL018
EFL1.8
F# 2.8
해상도6-8MP, 1.85µm, 1/2.5"
시야각128° — Calculate FoV for your sensor
이미지 서클6.8mm
왜곡-0.14
무게8g
IR 컷오프 필터650nm
구조5G2P

기계적 변형들

변형 설명
M12A 보호 등급 없음, 렌즈 1의 표면 1에 BBAR 코팅, AL6061 캡+배럴
M12B IP67 등급, 렌즈 1 표면 1에 BBAR 코팅, AL6061 캡+배럴

기계 레이아웃

카메라 기계적 호환성 표*

카메라/마운트 호환성
Commonlands CLA018 CLA018
e-con Systems S-Mount 9mm-13mm 높이 홀더
Allied Vision Alvium S-Mount
FLIR Blackfly S 보드
iDS uEye LE Rev1.1: Yes, Rev1.2: Must use PN ending C-NO
The Imaging Source M12
D3 카메라 모듈 D3 Engineering에 문의하십시오.

*카메라 제조업체에서 제공하는 표준 M12x0.5 렌즈 마운트를 전제로 한 기계적 호환성입니다. 광학 호환성은 별도로 확인하시기 바랍니다.

Same Day Ship by 12 PM PST
US-Based Optical Engineering Support
25,000+ Stock in California
100% MTF Tested

Frequently asked questions

What is the field of view of the CIL018 1.8mm M12 lens?

The CIL018 provides 128° FoV at 6.5mm on a 1/2.5\" sensor, with approximately 125° horizontal field of view. Image circle is 6.8mm as designed with a 7.1mm maximum.

What is the distortion spec of the CIL018 wide-angle M12 lens?

Distortion is -14% barrel distortion — comparatively low for a 128° M12 lens. The 5G2P construction with multiple aspherical surfaces is responsible for the tight aberration control across the field.

What is the difference between the CIL018 M12A and M12B variants?

Both share the same 5G2P optical design and F/2.8 aperture. The M12A has no ingress protection; the M12B is IP67-rated for splash-resistant and wet environments. Both use BBAR coating on surface 1 and AL6061 aluminum construction.

Is the CIL018 compatible with the Raspberry Pi HQ Camera?

Yes. The Raspberry Pi HQ Camera uses an M12 lens mount and is mechanically compatible with the CIL018. It is one of the better-performing wide-angle M12 lenses for Raspberry Pi builds at 6-8MP resolution.

What resolution sensors can the CIL018 M12 lens support?

The CIL018 is rated for 6-8MP sensors with 1.85µm pixel pitch. Sensors including the Sony IMX335 and AR0521 on 1/2.5\" formats are the primary design targets.

Does the CIL018 ship same day and is volume pricing available?

Orders placed before 12 PM PST ship same day from San Diego, CA. Volume pricing breaks start at 50 units, with additional tiers at 100, 250, 500, 1k, 2.5k, 5k, 10k, and 25k.

The CIL018 is a 1.8mm F/2.8 wide-angle M12 lens with 128° FoV on a 1/2.5" sensor, -14% barrel distortion, and a 5G2P optical design with multiple aspherical surfaces. It consistently shows up on short lists for the lowest-distortion M12 lenses available at 125°+ horizontal FoV. If straight lines need to look straight in your application, this is a serious candidate.

Image circle is 6.8mm as designed, with a usable maximum of 7.1mm — a small margin for slightly oversized formats. At 6-8MP and 1.85µm pixel pitch, sensors like the IMX335 and AR0521 are the target. The aspherical elements suppress aberrations well enough that the MTF holds up at 4K on 1/2.5" sensors — not a given at this price point in this form factor. Weight is 8g.

Two mechanical variants. The M12A is the standard build: no ingress protection, BBAR coating on lens surface 1, AL6061 cap and barrel. The M12B adds IP67 sealing — same optical formula, same performance, but rated for splash and moisture exposure. Both require a 9mm-13mm tall M12 holder. Use the Commonlands CLA018 for a confirmed fit.

Camera compatibility is broad. Allied Vision Alvium, FLIR Blackfly S, iDS uEye LE (Rev1.1 yes; Rev1.2 requires C-NO suffix), and The Imaging Source M12 boards all accept this lens mechanically. D3 Camera Module users should contact D3 directly. The Raspberry Pi HQ Camera is also compatible — this lens is one of the stronger-performing wide-angle M12 options for Pi-based systems that need wide coverage without heavy barrel distortion.

STP files and mechanical drawings are available on the product page. Ships same day from San Diego before 12 PM PST. Volume pricing starts at 50 units with breaks at 100, 250, 500, 1k, and above.

Similar M12 Lenses (S-Mount Lenses) for Embedded Machine Vision

CIL034-F2.3-M12A660

왜곡 없는 3.2mm 렌즈

$39.00

CIL059-F1.7-M12B650

왜곡률 최소화 6mm M12 렌즈

$49.00

CIL359-F1.6-M12A650

Automotive 5.9mm M12 Lens

$39.00

CIL122-F2.0-M12A650

IR 보정 12mm M12 렌즈

$59.00

CIL350-F2.4-M12A650

망원 35mm M12 렌즈

$59.00

CIL051-F2.8-M12ANIR

망원 50mm M12 렌즈

$79.00

CIL227-F2.5-M12B660

185°@7.8mm 어안 M12 렌즈

$39.00

CIL281-F1.8-M12A650

191°@6.4mm 어안 렌즈

$70.00

Commonlands에 대하여

Commonlands LLC designs and manufactures precision M12, C-mount, and M8 lenses for machine vision, robotics, and embedded camera systems. Based in San Diego, California, we stock inventory for same-day shipping and provide direct access to US-based optical engineers. Whether you need a single prototype lens or production volumes of 25,000+, our team supports the full lifecycle from optical design consultation through volume fulfillment.

Need help selecting the right lens for your camera module?

Contact our US-based Optical Engineers.