M12 렌즈 및 C 또는 CS 마운트 카메라와 함께 사용하기 위한 M12-to-C 마운트 어댑터
M12 / S-Mount Lens to C-Mount Adapter, 3.5mm thickness
A 3.5mm thick M12-to-C mount adapter for use with M12 lenses and C or CS mount cameras. Please read our page Lens Mounts 101 for more detail regarding compatibility. This adapter can be unscrewed using a spanner wrench.
In stock — orders before 12 PM PST ship same day
광학 및 기계 사양 테이블
| 렌즈 파라미터 | 성능 상세 정보 |
|---|---|
| 부품 번호 | CLA127 |
기계 레이아웃
Frequently asked questions
What M12 lenses work with the CLA127 adapter?
M12 lenses with a mechanical back focal length greater than 4mm are the best candidates. Telephoto M12 focal lengths like 12mm, 18mm, 25mm, and 35mm typically work, while wide-angle M12 lenses with short MBFL values usually cannot reach focus.
Will the CLA127 adapter work with CS-mount cameras?
Yes, the CLA127 uses standard 1″-32 TPI C-mount threading, which works with both C-mount and CS-mount cameras. On CS-mount cameras you may need a 5mm spacer ring, depending on lens MBFL.
How thick is the CLA127 M12-to-C mount adapter?
The CLA127 is 3.5mm thick. That low profile helps keep the adapter stack height under control.
Can I remove the CLA127 adapter once installed?
Yes, you can unscrew it with a standard spanner wrench. The adapter does not require any permanent modification to the camera or lens.
Does the CLA127 adapter ship same day?
Yes, orders placed before 12 PM PST ship same day from San Diego. The CLA127 is stocked in quantity at our US warehouse.
What about vignetting when using M12 lenses on C-mount cameras?
Vignetting happens when the M12 lens image circle is smaller than the C-mount camera sensor diagonal. You should check the lens image circle against your sensor size before you order, and you can read lens mount guide for compatibility details.
Similar Adapters & Lock Rings
Commonlands에 대하여
Commonlands LLC designs and manufactures precision M12, C-mount, and M8 lenses for machine vision, robotics, and embedded camera systems. Based in San Diego, California, we stock inventory for same-day shipping and provide direct access to US-based optical engineers. Whether you need a single prototype lens or production volumes of 25,000+, our team supports the full lifecycle from optical design consultation through volume fulfillment.
Need help selecting the right lens for your camera module?
Contact our US-based Optical Engineers.